How to Sublimate into my Aluinum Blanks

Heat press settings:

- temperature - 380-395 degrees F

- dwell time - 50-60 seconds

- pressure - very light

Note: The recommended settings above may need adjustments for best results.

Settings will vary depending on the heat press brand and model ink and paper

and atmospheric conditions.


- Remember to take off the protective tape before sublimating!

- If the finished product appears scratched, lighten the pressure slightly.

- If the image of the final product appears light increase the pressure or

the dwell time slightly (5-15 seconds).

- If the image on the final product appears blurred reduce the dwell time

slightly (5-15 seconds)